Cub Cadet SC 700 e Operation Manual - Page 17
Service And Maintenance
View all Cub Cadet SC 700 e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
SERVICE AND MAINTENANCE WARNING Before performing any type of maintenance/service, disengage all controls and stop the engine. Wait until all moving parts have come to a complete stop. Allow the engine to cool. Disconnect spark plug wire and ground it against the engine to prevent unintended starting. General Recommendations Engine Maintenance • Always observe safety rules on the mower and in the manual(s) when performing any maintenance. • The warranty on this mower does not cover items that have been subjected to operator abuse or negligence. To receive full value from warranty, operator must maintain the mower as instructed here. • Changing of engine-governed speed will void engine warranty. • Check that all hardware is in place & secure and tight before each use and before off season storage. Lubrication BLADE CONTROL Lubricate pivot points on the blade control at least once a season and before storage with light oil. This control must operate freely in both directions (Figure 23). WHEELS Lubricate all wheel hubs/axles at least once a season and before storage with light oil (Figure 23). Annually check the engine mounting bolts torque: Min. 29.2 ft-lbs (39.6 N-m), Max. 41.7 ft-lbs (56.3 N-m). Refer to the Engine Operator's Manual packed with your mower for a detailed description of all engine-related service specifications and storage. If engine fails to start, runs erratic, overheats, skips (hesitates) or idles poorly refer to the Engine Operator's Manual. IMPORTANT: Check engine oil level before each use. Refer to Engine Operator's Manual. CLEAN ENGINE • Before every use, clean grass, chaff or accumulated debris from engine. Keep linkage, spring, and controls clean. Keep area around and behind muffler free of any combustible debris. • Keeping engine clean allows air movement around engine. • Engine parts should be kept clean to reduce the risk of overheating and ignition of accumulated debris. CAUTION Do not use water to clean engine parts. Water could contaminate fuel system. Use a brush or dry cloth. Mower Maintenance DECK WASH (IF EQUIPPED) Your mower's deck may be equipped with a deck wash system. Use the deck wash to rinse grass clippings from the deck's underside and prevent the buildup of corrosive chemicals. Complete the following steps AFTER EACH MOWING: 1. Push the mower to a level, clear location on your lawn. Ensure your garden hose can reach your mower. Figure 23 CAUTION Make certain the mower's discharge chute is directed AWAY from your house, garage, parked cars, etc. 2. Remove the fast attach deck wash nozzle from the mower deck and thread it onto the end of your garden hose. 3. Attach garden hose with the deck wash nozzle to the water port on your deck's surface (Figure 24). 4. Turn the water ON. 17