Cuisinart EM-600 Owner Manual - Page 9

r

5P
SFNPWF
UIF
TUFBNGSPUIJOH
XBOE
QPTJUJPO
it pointing straight down, then rotate counterclockwise and pull straight out. To replace, position steam/frothing wand pointing up and rotate clockwise. t
It is not recommended to leave milk unrefrigerated for longer than 1 hour. Be sure to clean the milk tank regularly. See Cleaning The Milk Tank on page 9. CAPPUCCINO OR LATTE 1. Using the lever, open the brew head, insert a capsule, and close the brew head. type of milk may be used, but for best results, skim is recommended. Keep in mind that the milk volume will increase during frothing, so use a large enough cup. NOTE: If the milk tank is not installed or placed in the unit correctly, the CAPPUCCINO , LATTE , and STEAM LEDs will not light. Only lit LEDs are available functions. TEMPERATURE CONTROLS Extra-Hot is the default setting. If hot is desired, press and hold the button for 3 seconds to allow the temperature to decrease. The flashing light will turn off when it has reached the lower temperature. 2. Be sure there is milk in the milk tank and tank is properly installed (see Steam/Frothing section). 3. Place a cup on the drip tray, and position the steam/frothing wand in the cup. 4. Use the steam control dial on the milk tank cover to select the amount of air/ froth you want. NOTE: It is recommended to use more froth for cappuccino and latte. If you prefer less froth, use the setting on the dial. 5. Press either the CAPPUCCINO or LATTE button. 6. The frothed milk will be dispensed into the cup, followed by Cuisinart's patented Burst of Steam feature that quickly cleans the steam/ frothing wand. Espresso is then immediately dispensed. Tips for creating a perfect froth: Milk frothing is the steaming of milk. The steam does two things; it heats milk and it mixes in air to form a foamy texture. As with anything, perfecting the art of milk texturing takes practice, but the results are well worth it! Use cold, refrigerated milk in the milk tank. Any ENERGY SAVER MODE After 30 minutes of non-use the espresso machine will automatically switch to sleep mode and all the control lights will be dimmed by about 50%. When any button is pressed, the espresso machine will return to preheat mode and all the lights will flash. The machine is ready to operate when all the lights are steady again. AUTO-OFF MODE Following the 30-minute Energy Saver cycle, if there is an additional 30 minutes of non-use, the espresso machine will turn off. Press the power button to turn on again. CLEANING AND MAINTENANCE Cleaning Used Capsule Container Container holds approximately 10 capsules and some residual liquid after brewing. Be sure to empty the container of any used capsules periodically. The container is top-shelf dishwasher safe and may also be cleaned with warm soapy water. Cleaning External Parts We recommend regular cleaning of the espresso maker's external components. Cleaning the Housing Never immerse the machine in water or other 8