D-Link 3100 24 User Manual - Page 40

DGS-3100 Series Gigabit Stackable Managed Switch User Manual Field Description 100M/Full - Indicates the port is currently operating at 100 Mbps and full duplex mode. 100M/Half - Indicates the port is currently operating at 100 Mbps and half duplex mode. 1000M/Full - Indicates the port is currently operating at 1000 Mbps and full duplex mode. Auto -Indicates the port is automatically configured to the fastest network traffic the interface can manage. Flow Control Defines the flow control scheme used for the various port configurations. Ports configured for full-duplex use 802.3x flow control, half-duplex ports use backpressure flow control, and Auto ports use an automatic selection of the two. The default is Disabled. Learning Defines whether MAC address learning is enabled on the ports. The possible field values are: Enabled - Enables MAC address learning on the port. If MAC address learning is enabled, the source and destination MAC address are recorded in the Forwarding Table. (This is the default value) Disabled - Disables MAC address learning.. 2. Define the Unit, From Port, To Port, State, Speed, Flow Control, and Learning fields. 3. Click . The port configuration is saved, and the device is updated. 28