D-Link 900W Manual - Page 6
Connections, Rear Panel view - power supply
UPC - 790069262852
View all D-Link 900W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Connections Rear Panel view 802.11b Antenna Ethernet Cable Connector Reset Button DC Power Connector 802.11b Antenna The DCS-900W features an 802.11b wireless antenna for 802.11b wireless connectivity to your existing wireless network. The DCS-900W can be used in conjuction with an 802.11b compliant access point or router. EthernetCable Connector The DCS-900W features an RJ-45 connector for connections to 10Base-T Ethernet cabling or 100Base-TX Fast Ethernet cabling (which should be Category 5 UTP cable). The port supports the NWay protocol, allowing the DCS-900W to automatically detect or negotiate the transmission speed of the network. DC Power Connector The DC power input connector is labeled DC 5V with a single jack socket to supply power to the DCS-900W. Reset Button Reset will be initiated when the reset button is pressed once and Power LED begins to flash. Factory Reset will be initiated when the reset button is pressed continuously for three seconds or when the Power LED begins to light up. Release the reset button and the Power LED will begin to flash indicating that the DCS-900W's settings are reverting back to the factory settings. The IP address will also return to the default setting of 192.168.0.20. 6