D-Link 900W Manual - Page 9
Hardware Installation - led
UPC - 790069262852
View all D-Link 900W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Hardware Installation Attach the Antenna Locate the antenna included with your DCS-900W and attach it to the antenna connector located on the back of the DCS-900W. Attach the Swivel Stand Locate the stand mount on the bottom of the DCS900W and screw on the swivel stand. Connect the Ethernet Cable Connect the included Ethernet cable to the network cable connector located on the back panel of the DCS-900W and attach it to the network. Attach the External Power Supply Attach the external power supply to the DC power input connector located on the rear panel of the DCS-900W and connect it to your local power supply. Note: Power source is confirmed when the green LED Power Indicator located to the right of the lens on the DCS-900W is illuminated. Network Connectivity is confirmed when the orange LED Indicator on the DCS-900W located below the Power LED is illuminated. 9