D-Link DAP-1120 User Manual - Page 11
Setting Up Your DAP-1120
View all D-Link DAP-1120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Section 2 - Configuration Setting Up Your DAP-1120 Plug in the DAP-1120 to a power outlet. Verify that the power LED is blinking orange before continuing. Locate the Wi-Fi name (SSID) and password for your DAP-1120 device. These details are printed on the specification sticker on the underside of the device. Using your computer or mobile device's Wi-Fi connection utility, connect to the SSID of your DAP-1120 and enter the password. If you are unsure of how to connect to a wireless network, please refer to "Connect to a Wireless Network" on page 32, or consult your device's user manual. Once connected, you are ready to begin the setup process. There are two ways to configure your DAP-1120; using the QRS Mobile app on your smartphone or tablet device, or using the web GUI on your computer. For detailed information on either of the methods for configuring your DAP-1120, refer to the following sections of the manual: • "QRS Mobile App Setup" on page 9 • "Web-based Configuration" on page 13 D-Link DAP-1120 User Manual Outlet Ethernet 8