D-Link DAP-1120 User Manual - Page 16

Web-based Configuration

Get D-Link DAP-1120 PDF manuals and user guides View all D-Link DAP-1120 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Section 2 - Configuration Web-based Configuration To access the configuration utility for the DAP-1120 on your PC, first connect to the DAP-1120 wirelessly using the Wi-Fi name (SSID) and password located on your Wi-Fi Configuration Card. Then open a web browser and enter http://dlinkap.local. in the address bar. You can also use the IP address http://192.168.0.50. Note: If you have multiple DAP-1120 devices on the network, you can access web-based configuration via http://dlinkapxxxx. local. as shown in the included Wi-Fi Configuration Card, with "xxxx" being the last four digits of the DAP-1120's MAC address. Enter your password. By default, Admin is selected as the username and cannot be changed, and by default, the password is blank. The configuration interface will open, and you can configure the various settings for the DAP-1120. If you have not yet configured and uplink network, the home screen will show that there is no connection between the DAP-1120 and the uplink router. For detailed information on manually setting up your DAP-1120 to extend an existing wireless network, refer to"Using the Manual Method" on page 17. D-Link DAP-1120 User Manual 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
13
D-Link DAP-1120 User Manual
Section 2 - Configuration
Web-based Configuration
Enter your password. By default, Admin is selected as the username
and cannot be changed, and by default, the password is blank.
To access the configuration utility for the DAP-1120 on your PC,
first connect to the DAP-1120 wirelessly using the Wi-Fi name
(SSID) and password located on your Wi-Fi Configuration Card.
Then open a web browser and enter
in the
address bar. You can also use the IP address
.
Note:
If you have multiple DAP-1120 devices on the network,
you can access web-based configuration via
http://dlinkapxxxx.
local.
as
shown in the included Wi-Fi Configuration Card, with
“xxxx” being the last four digits of the DAP-1120’s MAC address.
The configuration interface will open, and you can configure the
various settings for the DAP-1120. If you have not yet configured
and uplink network, the home screen will show that there is no
connection between the DAP-1120 and the uplink router.
For detailed information on manually setting up your DAP-1120
to extend an existing wireless network, refer to “Using the Manual
Method” on page 17.