D-Link DAP-1120 User Manual - Page 19
Using the WPS Method
View all D-Link DAP-1120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Section 3 - Web-based Configuration Using the WPS Method To set up using the WPS method, select the first option from the setup wizard menu. Click Next to continue. The DAP-1120 uses the push-button method for WPS. After selecting WPS, the DAP-1120 will ask you to press the WPS push button on the access point or router you want to connect the DAP-1120 to. You have 120 seconds to press the button on your access point or router. Click Next to continue. If a connection has been successfully made, you will see a notice on the screen and the LED on the device will turn solid green. If the LED is lit solid amber after the connection process has finished, the DAP-1120 has established a poor quality connection. To improve the connection quality, the DAP-1120 should be relocated to a wall outlet closer to the source wireless router or AP. You can also use the WPS button on the side of the DAP-1120 to initiate a WPS connection with the uplink router. After pressing the WPS button on the DAP-1120, you will have 120 seconds to press the WPS button on your access point or router. The LED on the DAP-1120 will turn solid green when a connection has been successfully established with the uplink router. D-Link DAP-1120 User Manual DAP-1120 WPS Button 16