D-Link DAP-X2810 User Manual - Page 33

Section 3 - Configuration Intrusion The Wireless Intrusion Protection window is used to set APs as All, Valid, Neighborhood, Rogue, and New. Click the Save button to let your changes take effect. Wireless Band: Select 2.4GHz or 5GHz. AP List: Click the drop-down menu to select All, Valid, Neighbor, Rogue, and New. The following is a definition of the listed AP categories: y Valid: An AP which is authenticated to the network with encryption is classified as valid. y Neighbor: A detected AP with a weak signal strength is classified as a suspect neighbor. y Rogue: An AP that has been installed on the secure network without explicit authorization. y New: An alternative category. From the AP List select a detected AP and click Set as Valid, Set as Neighborhood, Set as Rogue, or Set as New to manually define the category type for the AP. Alternatively, click the radio button to mark all new access points as valid or rogue. Save: Click to save the updated configuration. To make the updates permanent, click Configuration > Save and Activate. D-Link DAP-X2810 User Manual 33