D-Link DAP-X2810 User Manual - Page 8
Basic Installation, Hardware Setup, Con the access point
View all D-Link DAP-X2810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Section 2 - Installation Basic Installation Hardware Setup To power on the DAP-X2810, you can use ONE of the following methods: 1. Plug one end of your Ethernet cable into theLAN(PoE) port of the DAP-X2810, and the other end into a port on a 802.3at PoE switch. 2. Purchase a DPE-301GI PoE injector separately if you need to connect the access point without a 802.3at PoE Switch. Configure the access point DAP-X2810 OR 802.3at PoE Switch PoE Injector Power Adapter Computer Computer To set up and manage the DAP-X2810, use one of the following methods: 1. Connect the access point and your computer to the same PoE switch. Manage the access point from the computer. Enter dapx2810.local in the address field of your browser. Log in to the Administration Web pages. The default login information is: Username: admin Password: admin 2. Connect the access point and your computer via DPE-301GI PoE injector. Manage the access point from the computer. Enter dapx2810.local in the address field of your browser. Log in to the Administration Web pages. The default login information is: Username: admin Password: admin D-Link DAP-X2810 User Manual 8