D-Link DES-1316 Product Manual - Page 18

Installing the Web Management Utility - firmware

Page 18 highlights

CONFIGURATION Through the Web browser you can configure Switch functions such as VLAN, Trunking, and QoS... etc. With the attached Web Management Utility, you can easily discover all the Web Management Switches, assign the IP Address, changing the password, and upgrade new firmware. Installing the Web Management Utility The following instructions guide you through the installation of the Web Management utility. 1. Insert the Utility CD in the CD-ROM Drive. 2. From the Start menu on the Windows desktop, choose Run. 3. In the Run dialog box, type D:\Web Management Utility\setup.exe (D:\ depends where your CD-ROM drive is located) and click OK. 4. Follow the on-screen instructions to install the utility. 5. Upon completion, go to Program Files -> web_management_utility and execute the Web Management utility. (Figure 6.) 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57

18
CONFIGURATION
Through the Web browser you can configure Switch functions such as
VLAN, Trunking, and QoS… etc.
With the attached Web Management Utility, you can easily discover
all the Web Management Switches, assign the IP Address, changing
the password, and upgrade
new firmware.
Installing the Web Management Utility
The following instructions guide you through the installation of the
Web Management utility.
1.
Insert the Utility CD in the CD-ROM Drive.
2.
From the
Start
menu on the Windows desktop, choose
Run
.
3.
In
the
Run
dialog
box,
type
D:\Web
Management
Utility\setup.exe (D:\ depends where your CD-ROM drive is
located) and click
OK
.
4.
Follow the on-screen instructions to install the utility.
5.
Upon
completion,
go
to
Program
Files
->
web_management_utility
and execute the Web Management
utility. (Figure 6.)