D-Link DGE-550SX User Guide - Page 12
FreeBSD, This enables the system to load the driver automatically. - drivers
UPC - 097564303357
View all D-Link DGE-550SX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
FreeBSD The FreeBSD driver supports the DGE-550SX network adapter on FreeBSD 5.x operating systems running on Intel x86 machines. To install the network driver on FreeBSD, proceed as follows: 1. After you have installed the network adapter in your computer, boot FreeBSD. 2. Login in as "root". 3. Install the driver software by typing: pkg_add e.g., pkg_add ykbsd60x86-8.12.1.3.tgz This installs the driver binary into /boot/kernel and the manpage into the directory /usr/share/man/man4. 4. After rebooting, open the file /boot/loader.conf. 5. Add the following line to the file: if_myk_load="YES" This enables the system to load the driver automatically. 6. Open the file /etc/rc.conf. 7. Add the following line to the file: ifconfig_myk0="inet " If you use DHCP, add DHCP instead of the local IP address: ifconfig_myk0="DHCP" Thus, the interface is configured. 8. Repeat step 7 for each network adapter installed. 9. Reboot your system. On reboot, the driver will be loaded and the network adapter will be configured automatically. - 10 -