D-Link DGS-3100-48P Product Manual - Page 152

DGS-3100 Series Gigabit Stackable Managed Switch User Manual To enable the 802.1X: 1. Click Security > 802.1X Setting. The 802.1X Setting Page opens: Figure 5-5. 802.1X Setting Page The 802.1X Setting Page contains the following fields: Field 802.1X Description Indicates if 802.1X is enabled on the device. The possible field values are: Enabled - Enables 802.1X on the device. Disabled -Disables 802.1X on the device. This is the default value. QuietPeriod (0-65535) sec Indicates the number of seconds that the device remains in the quiet state following a failed authentication exchange. The possible field range is 065535. The field default is 60 seconds. SuppTimeout (1-65535) sec Indicates the amount of time that lapses before EAP requests are resent to the supplicant. The field value is in seconds. The field default is 30 seconds. ServerTimeout (1-65535) sec Defines the amount of time that lapses before the device re-sends a request to the authentication server. The field value is specified in seconds. The field default is 30 seconds. MaxReq (1-10) times Displays the total amount of EAP requests sent. If a response is not received after the defined period, the authentication process is restarted. The field default is 2 retries. TxPeriod (1-65535) sec Defines the amount of time (in seconds) that lapses before EAP requests are resent. The field default is 30 seconds. ReAuthPeriod (300 - 4294967295) sec Displays the time span (in seconds) in which the selected port is reauthenticated. The field default is 3600 seconds. ReAuthEnabled Indicates if ports/MAC address can be re-authenticated after the port/MAC address authentication has timed out. The possible field values are: Enabled - Enables re-authenticating the port or MAC addresses after the port or MAC address authentication has timed out. This is the default 136