D-Link DGS-3620-52P-SE-LIC Reference Guide - Page 275
Queue Bandwidth Control Settings, Traffic Control Settings
View all D-Link DGS-3620-52P-SE-LIC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 275 highlights
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide Queue Bandwidth Control Settings To view the following window, click QoS > Bandwidth Control > Queue Bandwidth Control Settings, as show below: Figure 6-5 Queue Bandwidth Control Settings window The fields that can be configured are described below: Parameter Description Unit Select the unit you want to configure. From Port / To Port Use the drop-down menu to select the port range to use for this configuration. From Queue / To Queue Use the drop-down menu to select the queue range to use for this configuration. Min Rate (64-10240000) Specify the packet limit, in Kbps that the ports are allowed to receive. Tick the No limit check box to have unlimited rate of packets received by the specified queue. Max Rate (64-10240000) Enter the maximum rate for the queue. For no limit select the No Limit option. Click the Apply button to accept the changes made. NOTE: The minimum granularity of queue bandwidth control is 8Kbit/sec. The system will adjust the number to the multiple of 8 automatically. Traffic Control Settings On a computer network, packets such as Multicast packets and Broadcast packets continually flood the network as normal procedure. At times, this traffic may increase due to a malicious end station on the network or a malfunctioning device, such as a faulty network card. Thus, switch throughput problems will arise and consequently 265