D-Link DGS-3620-52T-SI Product Manual - Page 160
PTP Peer to Peer Transparent Port Settings
View all D-Link DGS-3620-52T-SI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide delay time of an event message. E2E - The port is configured to use the delay request-response mechanism. P2P - The peer delay mechanism. The default is E2E. Delay Request Interval (0-5) Enter the permitted mean time interval between successive delay request messages which are sent by a slave to a specific port on the master. This mean time interval value is determined and advertised by a master. Pdelay Request Interval (1-32) Enter the permitted mean time interval between successive pdelay_request messages. Synchronization Interval (1-2) Enter the mean time interval between successive Sync messages. Referred to as syncInterval. Tick the Half Second check box to have the 0.5 second of syncInterval. Click the Apply button to accept the changes made. PTP Peer to Peer Transparent Port Settings This window is used to configure the Pdelay Request Interval of the P2P transparent clock. To view this window, click L2 Features > PTP > PTP Peer to Peer Transparent Port Settings, as shown below: Figure 4-122 PTP Peer to Peer Transparent Port Settings window The fields that can be configured are described below: Parameter Description Unit Select a unit you want to configure. From Port / To Port Select the port range to use for this configuration. Pdelay Request Interval (1-32) Enter the permitted mean time interval between successive pdelay_request messages. Click the Apply button to accept the changes made. 150