D-Link DGS-3620-52T-SI Product Manual - Page 323
Adding an IPv6 Egress ACL Profile, Egress Access Rule List
View all D-Link DGS-3620-52T-SI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 323 highlights
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide value before being forwarded by the Switch. For more information on priority queues, CoS queues and mapping for 802.1p, see the QoS section of this manual. Replace DSCP (0-63) Select this option to instruct the Switch to replace the DSCP value (in a packet that meets the selected criteria) with the value entered in the adjacent field. When an ACL rule is added to change both the priority and DSCP of an IPv4 packet, only one of them can be modified due to a chip limitation. Currently the priority is changed when both the priority and DSCP are set to be modified. Time Range Name Tick the check box and enter the name of the Time Range settings that has been previously configured in the Time Range Settings window. This will set specific times when this access rule will be implemented on the Switch. Counter Here the user can select the counter. By checking the counter, the administrator can see how many times that the rule was hit. Ports When a range of ports is to be configured, the Auto Assign check box MUST be ticked in the Access ID field of this window. If not, the user will be presented with an error message and the access rule will not be configured. Ticking the All Ports check box will denote all ports on the Switch. Port Group ID Specify the port group ID to apply to the access rule. Port Group Name Specify the port group name to apply to the access rule. VLAN Name Specify the VLAN name to apply to the access rule. VLAN ID Specify the VLAN ID to apply to the access rule. Click the