D-Link DGS-3620-52T-SI Product Manual - Page 420
Flash File System Settings, Network Application > Flash File System Settings
View all D-Link DGS-3620-52T-SI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 420 highlights
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide To: Time In HH:MM Enter the time DST will end. Parameter Description DST Annual Settings Using annual mode will enable DST seasonal time adjustment. Annual mode requires that the DST beginning and ending date be specified concisely. For example, specify to begin DST on April 3 and end DST on October 14. From: Month Enter the month DST will start on, each year. From: Day Enter the day of the month DST will start on, each year. From: Time In HH:MM Enter the time of day DST will start on, each year. To: Month Enter the month DST will end on, each year. To: Day Enter the day of the month DST will end on, each year. To: Time In HH:MM Enter the time of day that DST will end on, each year. Click the Apply button to accept the changes made. Flash File System Settings Why use flash file system: In old switch system, the firmware, configuration and log information are saved in a flash with fixed addresses and size. This means that the maximum configuration file can only be 2Mb, and even if the current configuration is only 40Kb, it will still take up 2Mb of flash storage space. The configuration file number and firmware numbers are also fixed. A compatible issue will occur in the event that the configuration file or firmware size exceeds the originally designed size. Flash File System in our system: The Flash File System is used to provide the user with flexible file operation on the Flash. All the firmware, configuration information and system log information are stored in the Flash as files. This means that the Flash space taken up by all the files are not fixed, it is the real file size. If the Flash space is enough, the user could download more configuration files or firmware files and use commands to display Flash file information, rename file names, and delete it. Furthermore, the user can also configure the boot up runtime image or the running configuration file if needed. In case the file system gets corrupted, Z-modem can be used to download the backup files directly to the system. To view this window, click Network Application > Flash File System Settings as shown below: Figure 9-35 Flash File System Settings window Enter the Current Path string and click the Go button to navigate to the path entered. Click the C: link to navigate the C: drive After clicking the C: link button, the following page will appear: 410