D-Link DGS-3650 Product Manual - Page 269
VRRP Virtual Router Settings, VRRP Virtual Router Settings window
UPC - 790069293603
View all D-Link DGS-3650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 269 highlights
xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch Figure 4- 106. VRRP Global Settings window The following fields can be set: Parameter Description VRRP State Use the pull-down menu to enable or disable VRRP globally on the Switch. The default is Disabled. Non-owner response Enabling this parameter will allow the virtual IP address to be pinged from other host end Ping nodes to verify connectivity. This will only enable the ping connectivity check function. This command is Disabled by default. Click Apply to implement changes made. VRRP Virtual Router Settings The following window will allow the user to view the parameters for the VRRP function on the Switch. To view this window, click L3 Features > VRRP > VRRP Virtual Router Settings, as shown below: Figure 4- 107. VRRP Virtual Router Settings window The following fields are displayed in the window above: Parameter Description VRID / Interface Name VRID - Displays the virtual router ID set by the user. This will uniquely identify the VRRP Interface on the network. Interface Name - An IP interface name that has been enabled for VRRP. This entry must have been previously set in the IP Interfaces table. Virtual IP Address The IP address of the Virtual router configured on the Switch. Master IP Address Displays the IP address of the Master router for the VRRP function. Virtual Router State Displays the current state of the Virtual Router on the Switch. Possible states include Initialize, Master, and Backup. State Displays the VRRP state of the corresponding VRRP entry. Display Click the button to display the settings for this particular VRRP entry. Delete Click the to delete this VRRP entry. Click the Add button to display the following window to configure a VRRP interface. 253