D-Link DGS-3650 Product Manual - Page 71
DHCP/BOOTP Local Relay Settings, DHCPv6 Relay, DHCPv6 Relay Global Settings
UPC - 790069293603
View all D-Link DGS-3650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch DHCP/BOOTP Local Relay Settings This window is used to configure the global settings of DHCP/BOOTP local relay. To view this window, click Administration > DHCP/BOOTP Local Relay Settings, as shown below: Figure 2- 56. DHCP/BOOTP Local Relay Global Settings window The following parameters are displayed or can be configured: Parameter Description Global State Use the pull-down menu to enable or disable the status. VLAN State Use the pull-down menu to enable or disable the VLAN status. VLAN Name Enter the name of VLAN. VID List Display the VLAN list. Click Apply to implement the changes. DHCPv6 Relay This section contains information for configuring DHCPv6 relay, including DHCP v6 Relay Global Settings and DHCPv6 Relay Interface Settings. DHCPv6 Relay Global Settings This window is used to set up the DHCPv6 relay global status. To view this window, click Administration > DHCPv6 Relay > DHCPv6 Relay Global Settings, as shown below: Figure 2- 57. DHCPv6 Relay Global Settings window The following fields can be configured: Parameter Description Global State This field can be toggled between Enabled and Disabled using the pull-down menu. It is used to enable or disable the DHCPv6 Relay service on the Switch. The default is Disabled. 55