D-Link DI-714P Product Manual - Page 27
Advanced > Routing, Destination, Subnet Mask, Gateway, Enable - d link +
UPC - 790069247057
View all D-Link DI-714P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Using the Configuration Menu Advanced > Routing Static routes can be added if you require specific routes within your internal network. These routes will not apply to the WAN (Internet) network. Destination- Enter in the IP of the specified network that you want to access using the static route Subnet Mask- Enter in the subnet mask to be used for the specified net work. Gateway- Enter in the gateway IP address to the specified network. Hop- Enter in the amount of hops it will take to the specified network. Enable- Select this option for the specified static route to take effect. Hop Count - in a transmission path, each link is terminated at a network device such as a router or gateway. The number of hops equals the number of routers or gateways that data must pass through before reaching the destination. 27