D-Link DIR-600 User Guide - Page 22
Choose PPTP Point-to-Point-Tunneling Protocol if your ISP uses a PPTP connection. Your ISP will - username password
UPC - 790069324574
View all D-Link DIR-600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Section 3 - Configuration Internet Setup PPTP Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. PPTP: Select Dynamic (most common) or Static. Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. IP Address: Enter the IP address (Static PPTP only). Subnet Mask: Enter the Primary and Secondary DNS Server Addresses (Static PPTP only). Gateway: Enter the Gateway IP Address provided by your ISP. DNS: The DNS server information will be supplied by your ISP (Internet Service Provider.) Server IP: Enter the Server IP provided by your ISP (optional). PPTP Account: Enter your PPTP account name. PPTP Password: Enter your PPTP password and then retype the password in the next box. Maximum Idle Enter a maximum idle time during which the Internet Time: connection is maintained during inactivity. To disable this feature, enable Auto-reconnect. MTU: Maximum Transmission Unit - You may need to change the MTU for optimal performance. Connect Mode: Select either Always-on, Manual, or Connect-on demand. D-Link DIR-600 User Manual 22