D-Link DIR-600 User Guide - Page 32
DHCP Server Settings - range
UPC - 790069324574
View all D-Link DIR-600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Section 3 - Configuration DHCP Server Settings DHCP stands for Dynamic Host Control Protocol. The DIR-600 has a built-in DHCP server. The DHCP Server will automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to "Obtain an IP Address Automatically." When you turn your computers on, they will automatically load the proper TCP/IP settings provided by the DIR-600. The DHCP Server will automatically allocate an unused IP address from the IP address pool to the requesting computer. You must specify the starting and ending address of the IP address pool. Enable DHCP Check the box to enable the DHCP server on Server: your router. Uncheck to disable this function. DHCP IP Enter the starting and ending IP addresses for Address Range: the DHCP server's IP assignment. DHCP Lease The length of time for the IP address lease. Time: Enter the Lease time in minutes. D-Link DIR-600 User Manual 32