D-Link DIR-605 User Manual - Page 34
Port Forwarding - d link port forwarding
View all D-Link DIR-605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Section 3 - Configuration Port Forwarding This will allow you to open a single port or a range of ports. Rule: Check the box to enabled the rule. Name: Enter a name for the rule. IP Address: Enter the IP address of the computer on your local network that you want to allow the incoming service to. Start Port/ Enter the port or ports that you want to open. If End Port: you want to open one port, enter the same port in both boxes. Traffic Type: Select TCP, UDP, or Any D-Link DIR-605 User Manual 34
34
D-Link DIR-605 User Manual
Section 3 - Configuration
Port Forwarding
This will allow you to open a single port or a range of ports.
Check the box to enabled the rule.
Enter a name for the rule.
Enter the IP address of the computer on
your local network that you want to allow the
incoming service to.
Enter the port or ports that you want to open. If
you want to open one port, enter the same port
in both boxes.
Select
TCP
,
UDP
, or
Any
Rule:
Name:
IP Address:
Start Port/
End Port:
Traffic Type: