D-Link DIR-605 User Manual - Page 55
Configure WPA-PSK and WPA2-PSK
View all D-Link DIR-605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Section 4 - Security Configure WPA-PSK and WPA2-PSK It is recommended to enable encryption on your wireless Router before your wireless network adapters. Please establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead. 1. Log into the web-based configuration by opening a web browser and entering the IP address of the router (192.168.0.1). Click on Wireless Setup on the left side. 2. Next to Security Mode, select Enable WPA Only Wireless Security (enhanced) or Enable WPA2 Only Wireless Security (enhanced). 3. Next to Cipher Mode, select TKIP, AES, or Both. 4. Next to PSK/EAP, select PSK. 5. Next to Network Key, enter a key (passphrase). The key is an alpha-numeric password between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. Make sure you enter this key exactly the same on all other wireless clients. 6. Click Save Settings to save your settings. If you are configuring the Router with a wireless adapter, you will lose connectivity until you enable WPA-PSK or WPA2-PSK on your adapter and enter the same passphrase as you did on the Router. D-Link DIR-605 User Manual 55