D-Link DNR-326 User Manual - Page 44
Status, Camera Status
View all D-Link DNR-326 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Section 3 - Configuration Status Camera Status This page displays the connection and recording status of your cameras. Connection Shows the camera connection status. The user can click Status: Connect or Disconnect to change the connection status. Recording Shows the recording schedule and current recording status of Status: the cameras. Please note that if the camera is disconnected, the recording may continue but will produce blank video. Frame Rate: Displays the frame rate of the camera. Bit Rate: Displays the transmission bit rate of the camera. Note: If the Frame Rate or Bit Rate is too low, please check your network configuration between the cameras and the NVR. If the bit rate is too high, it will cause the Live Video display to slow or lag. Please modify the quality or bitrate setting in the camera web GUI accordingly. Disk Status: Shows the hard drive space and estimated remaining recording time status. Note: The recording time information is estimated by current bit rate. This may change each time a user refreshes this page. D-Link DNR-326 User Manual 40