D-Link DP-100 Product Manual - Page 17
These LED indicators light to show that the DP-100 is
 |
View all D-Link DP-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
DP-100 Multiprotocol Ethernet Print Server User's Guide ◊ The indicator blinks off briefly to indicate that the DP-100 is transmitting to the network. ♦ Link/Rx ◊ Steady or flashing green confirms that the DP-100 has a good connection to the Ethernet network. ◊ The indicator blinks off briefly to indicate that the DP-100 is receiving from the network. ♦ LPT1, LPT2, COM ◊ These LED indicators light to show that the DP-100 is transferring print data through the appropriate parallel or serial port. These three indicators are also used by the print server's power-on self test (POST) to indicate any hardware failures. Introduction 5
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12 -
13 -
14 -
15 -
16 -
17 -
18 -
19 -
20 -
21 -
22 -
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
 |
 |
DP-100 Multiprotocol Ethernet Print Server User’s Guide
Introduction
5
◊
The indicator blinks off briefly to indicate that the DP-100 is
transmitting to the network.
♦
Link/Rx
◊
Steady or flashing green confirms that the DP-100 has a good
connection to the Ethernet network.
◊
The indicator blinks off briefly to indicate that the DP-100 is
receiving from the network.
♦
LPT1
,
LPT2
,
COM
◊
These LED indicators light to show that the DP-100 is
transferring print data through the appropriate parallel or serial
port.
These three indicators are also used by the print server’s power-on
self test (POST) to indicate any hardware failures.