D-Link DP-100 Product Manual - Page 21
Testing Your DP-100, Wall-Mounting the DP-100 - firmware
View all D-Link DP-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
DP-100 Multiprotocol Ethernet Print Server User's Guide off off on/steady on/steady on/steady on/steady flashing flashing flashing flashing flashing off off off on/steady off flashing flashing on/steady flashing off on/steady flashing off off off flashing EEPROM error Flash Protected LPT1 error Timer INT error LAN IO Base error RAM error Parallel-1 Controller error Flash erase/program error Need to reload firmware Testing Your DP-100 The PS Admin software includes a Print Test function for confirmation of printer cable connections and functions. That operational test can be completed after you have installed the PS Admin software, and have configured your DP-100 and its ports. See the Testing Your Print Server section of the Print Server Administration User's Guide. Wall-Mounting the DP-100 The bottom of the DP-100's case has a pair of wall-mount sockets, and screws and nylon anchors are supplied, to facilitate mounting the DP-100 to a wall or partition adjacent to your printers. To mount the DP-100 with the front panel facing up (and the printer port connectors facing down), set the two mounting screws at the lower-left and upper-right corners of a rectangle as shown below (actual size): Unpacking and Installation 9