D-Link DSL-200 User Guide - Page 27
Connect to Internet - LAN Driver Users - driver windows 7
UPC - 790069235900
View all D-Link DSL-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Connect to Internet - LAN Driver Users If your ADSL connection uses either the RFC 2684 or the RFC 1577 protocol, you must set your own TCP/IP configuration. The following information will be provided to you by your DSL service provider: ü IP Address ü Subnet Mask ü Gateway ü DNS Host Name ü DNS Domain ü DNS Server Windows 98 or Windows Me (LAN Driver) Follow these steps if you are using the RFC 2684 or RFC 1577 protocol on a computer running Windows 98 or Windows Me. 1. From the Start menu, select Settings, Control Panel, and then double-click on the Network icon. 2. The Network window appears. Select the Configuration tab, scroll down the installed network components list and click on TCP/IPà D-Link DSL-200 USB ADSL Modem 3. Click the Properties button. 4. The TCP/IP Properties window will appear. Select the IP Address tab and then select the Select an IP address option. Enter the IP Address and Subnet Mask settings given to you by your ISP or ADSL service provider. 5. Select the Gateway tab and enter the IP settings in the New gateway field. Click Add. Select the DNS Configuration tab. Select the Enable DNS option. Type in your host name in the Host: field. Type in your domain name in the Domain: field. Enter the DNS settings in the DNS Server Search Order field and click Add. If you have more than one DNS IP address, repeat this step. You can have up to 3 DNS servers listed here. After all the TCP/IP information has been entered, click OK. The Network window again appears, click OK. The System Settings Change window appears. You need to restart your computer for the changes to go into effect. Click Yes.