D-Link DSL-504 Product Manual - Page 9
Static Routing, Default Routing, ATM (Asynchronous Transfer Mode), Precise ATM Traffic Shaping - telnet
View all D-Link DSL-504 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
DSL-504 ADSL Router User's Guide Static Routing This allows you to select a data path to a particular network destination that will remain in the routing table and never "age out". This enables you to route IP traffic to a specific destination within your LAN (for example to a another router or a server) or outside your network (to an ISP defined default gateway for instance). Default Routing This allows you to choose a default path for incoming data packets for which the destination address is unknown. This is particularly useful when the Router functions as the sole connection to the Internet. ATM (Asynchronous Transfer Mode) The DSL-504 supports Bridged Ethernet over ATM, IP over ATM and PPP over ATM. The Router can support up to eight Virtual Circuit Connections (VCCs). Precise ATM Traffic Shaping Traffic shaping is a method of controlling the flow rate of ATM data cells. It functions to establish the Quality of Service for ATM data transfer. G.hs (Auto-handshake) The Router can automatically choose either the G.lite or G.dmt ADSL connection standards. High Performance Very high rates of data transfer are possible with the Router. Up to 8 Mbps downstream bit rate using G.dmt. Full Network Management The DSL-504 incorporates SNMP (Simple Network Management Protocol) support and menu-driven network management via an RS-232 or Telnet connection. Telnet Connection The Telnet feature enables a network manager to access the Router's management software remotely. Easy Installation The Router uses a web-based interface management system compatible with most standard web browsers for easy installation and management. 3