D-Link DWA-620 User Manual - Page 44

Configure WPA/WPA2

Get D-Link DWA-620 PDF manuals and user guides View all D-Link DWA-620 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

Section 4 - Wireless Security Configure WPA/WPA2-Enterprise Using the D-Link Wireless Connection Manager WPA and WPA2 are for advanced users who are familiar with using a RADIUS server and setting up certificates. 1. Open the Wireless Utility by double-clicking on the D-Link icon in your system tray (lower-right corner of screen). Click on New to create a new profile or highlight an existing profile and click Modify. 2. Select WPA/WPA2 under Set Security Option and then select TKIP or AES. 3. Click on Advanced Config to continue. 4. Next to EAP Type, select EAP-TLS, EAP-TTLS, or PEAP. Extensible Authentication Protocols allow devices on the network to request authentication from the RADIUS server in the network. All the devices on the network must use the same EAP type when using a RADIUS server for authentication. Some RADIUS servers require that the Validate Server field be selected. Check this field if your RADIUS server requires validation. 5. Select an User Certificate from the drop-down menu. 6. Enter the login information required to authenticate. 7. Click Add to enter the IP address(es) of your RADIUS servers. 8. Click OK to save your settings. D-Link DWA-620 User Manual 44

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
44
D-Link DWA-620 User Manual
Section 4 - Wireless Security
Configure WPA/WPA2
-Enterprise
Using the D-Link Wireless Connection Manager
WPA and WPA2 are for advanced users who are familiar with using a RADIUS server and setting up certificates.
1.
Open the Wireless Utility by double-clicking on the D-Link icon in your system tray
(lower-right corner of screen). Click on
New
to create a new profile or highlight an
existing profile and click
Modify
.
2.
Select
WPA/WPA2
under
Set Security Option
and then select
TKIP
or
AES
.
3.
Click on
Advanced Config
to continue.
4.
Next to
EAP Type
, select
EAP-TLS
,
EAP-TTLS
, or
PEAP
. Extensible
Authentication Protocols allow devices on the network to request
authentication from the RADIUS server in the network. All the devices on
the network must use the same EAP type when using a RADIUS server for
authentication. Some RADIUS servers require that the Validate Server field
be selected. Check this field if your RADIUS server requires validation.
5.
Select an
User Certificate
from the drop-down menu.
6.
Enter the login information required to authenticate.
7.
Click
Add
to enter the IP address(es) of your RADIUS servers.
8.
Click
OK
to save your settings.