D-Link WBR2310 Product Manual - Page 22
IP Address, Subnet Mask, Gateway, Server IP, L2TP Account, L2TP Password, Maximum Idle, Connect Mode - d link default ip
UPC - 790069288630
View all D-Link WBR2310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Section 3 - Configuration Internet Setup L2TP Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection.Your ISP will provide you with a username and password. This option is typically used for DSL services. L2TP: Select Dynamic (most common) or Static. Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. IP Address: Enter the IP address (Static L2TP only). Subnet Mask: Enter the Primary and Secondary DNS Server Addresses (Static L2TP only). Gateway: Enter the Gateway IP Address provided by your ISP. DNS: The DNS server information will be supplied by your ISP (Internet Service Provider.) Server IP: Enter the Server IP provided by your ISP (optional). L2TP Account: Enter your L2TP account name. L2TP Password: Enter your L2TP password and then retype the password in the next box. Maximum Idle Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Time: Auto-reconnect. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1492 is the default MTU. Connect Mode: Select either Always-on, Manual, or Connect-on demand. D-Link WBR-2310 User Manual 22