D-Link WBR2310 Product Manual - Page 53

Configure WPA RADIUS - wireless router manual

Get D-Link WBR2310 - RangeBooster G Wireless Router PDF manuals and user guides
UPC - 790069288630
View all D-Link WBR2310 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

Section 4 - Security Configure WPA (RADIUS) It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead. 1. Log into the web-based configuration by opening a web browser and entering the IP address of the router (192.168.0.1). Click on Wireless Settings on the left side. 2. Next to Security Mode, select Enable WPA-Personal Security or Enable WPA2-Personal Security. 3. Next to Cipher Mode, select TKIP, AES, or Auto. 4. Next to PSK/EAP, select EAP. 5. Next to RADIUS Server 1 enter the IP Address of your RADIUS server. 6. Next to Port, enter the port you are using with your RADIUS server. 1812 is the default port. 7. Next to Shared Secret, enter the security key. 8. If you have a secondary RADIUS server, enter its IP address, port, and secret key. 9. Click Apply Settings to save your settings. D-Link WBR-2310 User Manual 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
53
D-Link WBR-2310 User Manual
Section 4 - Security
Configure WPA (RADIUS)
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish
wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to
the added overhead.
1.
Log into the web-based configuration by opening a web browser and entering the IP address of the router (192.168.0.1).
Click on
Wireless Settings
on the left side.
2. Next to
Security Mode
, select
Enable WPA-Personal Security
or
Enable WPA2-Personal Security
.
3. Next to
Cipher Mode
, select
TKIP, AES,
or
Auto
.
4. Next to
PSK/EAP
, select
EAP
.
5. Next to
RADIUS Server 1
enter the IP Address of your RADIUS
server.
6. Next to
Port
, enter the port you are using with your RADIUS
server. 1812 is the default port.
7. Next to
Shared Secret
, enter the security key.
8. If you have a secondary RADIUS server, enter its IP address, port, and secret key.
9. Click
Apply Settings
to save your settings.