DeLonghi ESAM5500M Owner Manual - Page 21

Displayed Messages

Page 21 highlights

DISPLAYED MESSAGES EN DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY FILL TANK! • The water tank is empty or positioned incorrectly. • Fill the tank with water and/or insert it correctly, pushing it as far as it will go until it clicks into place. GROUND TOO FINE ADJUST MILL! Insert water spout and press ok • The grinding is too fine and the coffee runs off too slowly. • The machine is not able to make coffee. • Turn the grinding adjustment knob one click towards the 7. • Insert the hot water spout, press the button and run off water from the spout for a few seconds INSERT WATER SPOUT! EMPTY GROUNDS CONTAINER • The water spout is not inserted or is inserted incorrectly. • The grounds container (A9) is full. • Insert the hot water spout. • Empty the grounds container and clean, then replace. Important: when removing the drip tray, the grounds container MUST be emptied, even if it is not completely full. If this is not done, when you make the next coffees, the grounds container may fill up more than expected and clog the machine. INSERT GROUNDS CONTAINER INSERT MILK CONTAINER! ADD PRE-GROUND COFFEE! • After cleaning, the grounds container has not been replaced. • The milk container is not inserted. • The "pre-ground coffee" function has been selected without placing any preground coffee in the funnel. • Open the service door and insert the grounds container. • Insert milk container. • Add the pre-ground coffee to the funnel or select the "coffee beans" function. 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26

21
EN
DISPLAYED MESSAGES
DISPLAYED MESSAGE
POSSIBLE CAUSE
REMEDY
FILL TANK!
The water tank is empty or
positioned incorrectly.
Fill the tank with water
and/or insert it correctly,
pushing it as far as it will go
until it clicks into place.
GROUND TOO FINE ADJUST
MILL!
Insert water spout and press
ok
The grinding is too fine and
the coffee runs off too
slowly.
The machine is not able to
make coffee.
Turn the grinding adjust-
ment
knob
one
click
towards the 7.
Insert the hot water spout,
press the
button and
run off water from the
spout for a few seconds
INSERT WATER SPOUT!
The water spout is not
inserted
or
is
inserted
incorrectly.
Insert the hot water spout.
EMPTY GROUNDS CONTAINER
The grounds container (A9)
is full.
Empty the grounds contai-
ner and clean, then replace.
Important: when removing
the drip tray, the grounds
container MUST be emp-
tied, even if it is not com-
pletely full. If this is not
done, when you make the
next coffees, the grounds
container may fill up more
than expected and clog the
machine.
INSERT GROUNDS CONTAI-
NER
After cleaning, the grounds
container has not been
replaced.
Open the service door and
insert the grounds contai-
ner.
INSERT MILK CONTAINER!
The milk container is not
inserted.
Insert milk container.
ADD PRE-GROUND COFFEE!
The "pre-ground coffee"
function has been selected
without placing any pre-
ground coffee in the funnel.
Add the pre-ground coffee
to the funnel or select the
"coffee beans" function.