Dell 1600n Multifunction Mono Laser Printer Dell Laser Multi-Function Printer - Page 149
No Job Found, Memory Full
View all Dell 1600n Multifunction Mono Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
[Hsync Error] [LSU Error] A problem has occurred in the Laser Scanning Unit (LSU). Unplug the power cord and plug it back in. If the problem persists, please call for service. [Jam 1] [No Cartridge] The toner cartridge is not installed. Install the toner cartridge. See page 23. [Line Error] Your multi-function printer cannot connect with a remote machine or has lost contact because of a problem with the phone line. Try again. If the problem persists, please wait for an hour or try a different phone line if possible and then try to connect again. Memory Full [No Answer] No. Not Assigned No. Not Available Or, turn the ECM mode on. See page 142. The memory is full. Delete unnecessary documents, retransmit after more memory becomes available or split the transmission into more than one operation. The remote fax machine has not answered Try again. Verify the number to make after several redial attempts. sure a fax can be received. The speed dial location you tried to use has no number assigned to it. Dial the number manually using the number keypad or assign the number. See page 128. You have tried to delete the number for the delayed fax job. Verify the number to be deleted and try again. OR [No Paper] The paper in the paper tray has run out. Add Paper No Job Found You are performing an Add/Cancel operation, but there are no jobs waiting. [Paper Jam 0] Paper has jammed in the feeding area of the paper tray. Delete the number after the delayed fax job is sent. Load paper in the paper tray. See page 25. Check the display to see if there are any scheduled jobs. The display should indicate if any scheduled jobs are in Standby mode, for example, Delay Fax. Clear the jam. See page 164. Open/Close Door [Paper Jam 1] Paper has jammed in the paper exit area. Clear the jam. See page 166. Open/Close Door