Dell Alienware 15 R2 Service Manual - Page 102
Replacing the display back-cover, Procedure, Post-requisites
View all Dell Alienware 15 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Replacing the display backcover WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Place the display back-cover on a clean and flat surface. 2 Follow the procedure from step 1 to step 3 in "Replacing the Alienware AlienHead LED board". 3 Follow the procedure from step 1 to step 3 in "Replacing the display-panel AlienFX LEDs". 4 Adhere the display board and camera cable to the display back-cover. 5 Route the display-board cable through the routing guides on the display back-cover. Post-requisites 1 Replace the camera. 2 Replace the display hinges. 3 Replace the display panel. 4 Follow the procedure from step 2 to step 5 in "Replacing the display bezel". 5 Replace the display assembly. 6 Replace the hinge covers. 7 Follow the procedure from step 5 to step 11 in "Replacing the palm rest". 8 Replace the wireless card. 9 Replace the solid-state drives. 10 Replace the memory modules. 11 Replace the base panel. 102