Dell Alienware 15 R2 Service Manual - Page 66
Replacing the I/O board, Procedure, Post-requisites
View all Dell Alienware 15 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Replacing the I/O board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Align the screw holes on the I/O board with the screw holes on the computer base. 2 Replace the screws that secure the I/O board to the computer base. 3 Slide the I/O-board cable into the I/O board and press down on the latch to secure the cable. Post-requisites 1 Follow the procedure from step 5 to step 11 in "Replacing the palm rest". 2 Replace the solid-state drives. 3 Replace the memory module. 4 Replace the base panel. 66