Dell Alienware Aurora - R2 Service Manual (English only) - Page 32
Removing the PCI-Express Card(s
View all Dell Alienware Aurora - R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Removing the PCI-Express Card(s) 1. Follow the instructions in "Before You Begin" on page 6. 2. Remove the left side-panel (see "Removing the Left Side-Panel" on page 11). 3. Open the PCI shroud (see "Opening the PCI Shroud" on page 18). 4. Locate the PCI-Express card on the system board (see "System Board Components" on page 14). 5. Disconnect any cables connected to the card (if applicable). 6. Remove the screw that secures the card to the chassis. 7. Remove the card. • For a PCI-Express x1 card, grasp the card by its top corners, and ease it out the card connector. 4 • For a PCI-Express x16 card, press the securing tab on the card connector as you grasp the card by its top corners, and then ease the card out of the card connector. NOTE: If you are not replacing a card, install a filler bracket in the empty card-slot opening. 3 1 screw 3 securing tab CHAPTER 6: PCI-EXPRESS CARD(S) 1 2 2 card connector 4 card 032 /032