Dell Alienware Aurora R3 Service Manual - Page 13
Replacing the PCI-Fan Assembly
View all Dell Alienware Aurora R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
4. Remove the drive-bay shroud (see Removing the Drive-Bay Shroud). 5. Remove full-length PCI-Express card(s), if any (see Removing the PCI-Express Card(s)). 6. Disconnect the PCI-fan assembly cable from the connector on the master I/O board. 7. Press the tabs and lift the PCI-fan assembly out of the metal brackets on the chassis. 1 tabs (2) 2 PCI-fan assembly 3 PCI-fan assembly cable Replacing the PCI-Fan Assembly 1. Follow the instructions in Before You Begin. 2. Align the PCI-fan assembly with the metal brackets on the chassis. 3. Slide the PCI-fan assembly into the chassis. 4. Connect the PCI-fan assembly cable to the connector on the master I/O board. 5. Replace full-length PCI-Express card(s), if any (see Replacing the PCI-Express Card(s)). 6. Replace the drive-bay shroud (see Replacing the Drive-Bay Shroud). 7. Close the PCI shroud (see Closing the PCI Shroud). 8. Replace the left side-panel (see Replacing the Left Side-Panel). CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in damage to the computer. 9. Connect your computer and all attached devices to electrical outlets, and turn them on. Back to Contents Page