Dell Alienware Aurora R3 Service Manual - Page 35
Power Supply
View all Dell Alienware Aurora R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Back to Contents Page Power Supply Alienware Aurora Service Manual Removing the Power Supply Replacing the Power Supply WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. WARNING: Do not operate your computer with any cover(s) (including computer panels, bezels, filler brackets, etc.) removed. WARNING: To guard against likelihood of electric shock, laceration by moving fan blades, or other unexpected injuries, always unplug your computer from the electrical outlet before removing the side panel(s). CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not covered by your warranty. CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer). Removing the Power Supply 1. Follow the instructions in Before You Begin. 2. Remove the left side-panel (see Removing the Left Side-Panel). 3. Lift the tab and slide the power-supply cover towards the back of the chassis. 4. Lift the power-supply cover away from the chassis. 1 power-supply cover 2 tab 5. Disconnect the DC wire harness from the power supply. 6. Loosen the four captive screws that secure the power supply to the back of the chassis. 7. Slide the power supply out through the back of the chassis.