Dell D630  Service Manual - Page 94

Installing the Fan

Get Dell D630 - LATITUDE ATG NOTEBOOK PDF manuals and user guides
UPC - 019801087219
View all Dell D630 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 94 highlights

DellTM XFR D630 Fully Rugged Notebook Service Manual 1. Follow the instructions in Before You Begin. 248H 2. Remove the hinge cover (see Removing the Hinge Cover). 249H 3. Remove any installed media bay device (see XBay Devices). 250H 4. Remove the keyboard (see Keyboards). 251H 5. Remove the display assembly (see Removing the Display Assembly). 25H 6. Remove the palm rest (see Removing the Palm Rest). 253H 7. Remove the processor thermal-cooling assembly (see Removing the Processor Thermal254H Cooling Assembly). 8. Remove the 3 M3 x 4-mm screws that secure the fan to the base. 4 3 2 1 1 Fan connector 2 Fan cable 3 Fan cable grommet 4 Fan 9. Disconnect the fan cable from the system board and remove the fan. 21.2 Installing the Fan 1. Install the fan and attach to the base using the 3 M3 x 4-mm screws. 2. Attach the fan cable to the system board. Then attach the grommet on the fan cable to the cage enclosure. 3. Replace the processor thermal-cooling assembly (see Installing the Processor Thermal-Cooling 25H Assembly). 4. Replace the palm rest (see Installing the Palm Rest). 256H NOTE: Ensure that you reconnect the coin-cell battery (see Coin-Cell Battery) before you replace 257H the keyboard. Page 94 of 106 Revision A01

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
Dell
TM
XFR D630 Fully Rugged Notebook Service Manual
Page 94 of 106
Revision A01
1.
Follow the instructions in
Before You Begin
.
2.
Remove the hinge cover (see
Removing the Hinge Cover
).
3.
Remove any installed media bay device (see
XBay Devices
).
4.
Remove the keyboard (see
Keyboards
).
5.
Remove the display assembly (see
Removing the Display Assembly
).
6.
Remove the palm rest (see
Removing the Palm Rest
).
7.
Remove the processor thermal-cooling assembly (see
Removing the Processor Thermal-
Cooling Assembly
).
8.
Remove the 3 M3 x 4-mm screws that secure the fan to the base.
1
Fan connector
2
Fan cable
3
Fan cable grommet
4
Fan
9.
Disconnect the fan cable from the system board and remove the fan.
21.2
Installing the Fan
1.
Install the fan and attach to the base using the 3 M3 x 4-mm screws.
2.
Attach the fan cable to the system board.
Then attach the grommet on the fan cable to the
cage enclosure.
3.
Replace the processor thermal-cooling assembly (see
Installing the Processor Thermal-Cooling
Assembly
).
4.
Replace the palm rest (see
Installing the Palm Rest
).
NOTE:
Ensure that you reconnect the coin-cell battery (see
Coin-Cell Battery
) before you replace
the keyboard.
1
2
3
4