Dell Force10 S25-01-GE-24P Setup and Buffer Tuning of the S25P for Storage Env - Page 6

Figure 2 Defining a Buffer Profile for ASIC Queues [in bytes] ! buffer-profile fp eql-hig buffer dedicated queue0 3 queue1 3 queue2 3 queue3 3 queue4 3 queue5 3 queue6 3 queue7 3 buffer dynamic 1257 Force10# Figure 3 Configuring Internal ASIC Buffers in Stack Unit 0 ! buffer fp-uplink stack-unit 0 port-set 0 buffer-policy eql-hig buffer fp-uplink stack-unit 0 port-set 1 buffer-policy eql-hig Force10# Figure 4 Applying the Buffer Profile to all 1Gig and 10Gig Ports ! interface range gi 0/1 - 24 , te 0/25 - 28 buffer-policy eql-fp Force10# Figure 5 Flow Control for 1Gig Interfaces ! interface range gi 0/1 - 24 flow-control rx on tx on Force10# Figure 6 Refresh Interval for Interface Statistics ! rate-interval 30 Force10# Figure 7 Configuring Ten Gig Ports [assuming all four 10Gig interfaces are available] ! interface range te 0/25 - 28 no ip address mtu 9252 switchport flowcontrol rx on tx on threshold 1024 1024 1054 rate-interval 30 no shutdown Force10# Figure 8 Assigning Ports to a VLAN ! interface vlan 2 untagged gi 0/1 - 24, te 0/25 - 28 Force10# 6 Basic Layer 2 Setup and Buffer Tuning of the S25P for Storage Environments