Dell Force10 Z9000 Installing the Z9000 System - Page 33
Replace a Fan Module, follow these steps
View all Dell Force10 Z9000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Replace a Fan Module To replace a fan module, follow these steps: Step 1 Task Twist the latching screws so that the fan screen detaches from the system. PSU0 Fan Module 0 Fan Module 1 Fan Module 2 Fan Module 3 Grab Handle PSU1 Screw 2 Remove the fan screen and set it aside. 3 Loosen the securing screw on the side of the module. CAUTION: You must complete steps 4 and 5 within one minute or the system will power down. 4 Use the grab handle on the module to slide it out of the bay. 5 Use the grab handle on the replacement module to slide it into the bay. 6 Tighten the captive screw on the module with a screwdriver. Ensure that the module is secure. 7 Replace the fan screen. 8 Twist the latches to the fan screen until it is securely attached to the system. Fans | 33