Dell Inspiron 15 3576 Inspiron 15-3576 Service Manual - Page 33
Place the base cover on the palm-rest assembly and route the optical-drive cable
View all Dell Inspiron 15 3576 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
3 Place the base cover on the palm-rest assembly and route the optical-drive cable through the slot on the palm-rest assembly. 4 Slide the tabs on the base cover into the slots on the palm-rest assembly and snap the base cover into place. 5 Slide the optical-drive cable into its connector on the system board and close the latch to secure the cable. 6 Replace the five screws (M2x5) that secure the palm-rest assembly to the base cover. 7 Close the display and turn the computer over. 8 Replace the three screws (M2x2) that secure the base cover to the palm-rest assembly. 33
3
Place the base cover on the palm-rest assembly and route the optical-drive cable
through the slot on the palm-rest assembly.
4
Slide the tabs on the base cover into the slots on the palm-rest assembly and
snap the base cover into place.
5
Slide the optical-drive cable into its connector on the system board and close the
latch to secure the cable.
6
Replace the
five
screws (M2x5) that secure the palm-rest assembly to the base
cover.
7
Close the display and turn the computer over.
8
Replace the three screws (M2x2) that secure the base cover to the palm-rest
assembly.
33