Dell Inspiron 15 3576 Inspiron 15-3576 Service Manual - Page 78

Replacing the system board, Procedure

Get Dell Inspiron 15 3576 PDF manuals and user guides View all Dell Inspiron 15 3576 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 78 highlights

Replacing the system board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. NOTE: Your computer's Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup program after you replace the system board. NOTE: Replacing the system board removes any changes you have made to the BIOS using the BIOS setup program. You must make the appropriate changes again after you replace the system board. Procedure 1 Connect the power-adapter port cable to the system board. 2 Adhere the tape that secures the power-adapter port cable to the system board. 3 Turn the system board over. 4 Align the screw holes on the system board with the screw holes on the palm-rest assembly. 5 Replace the two screws (M2x3) that secures the system board to the palm-rest assembly. 6 Connect the touch-pad cable and close the latch to secure the cable. 7 Connect the speaker cable to the system board. 8 Connect the I/O-board cable and close the latch to secure the cable. 9 Connect the hard-drive cable and close the latch to secure the cable. 10 Connect the power-button board cable and close the latch to secure the cable. 11 Connect the display cable and close the latch to secure the cable. 12 Adhere the tape that secures the display cable to the system board. 13 Close the display hinges. 78

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
Replacing the system board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before
working inside your computer
. After working inside your computer, follow
the instructions in
After working inside your computer
. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance
.
NOTE: Your computer’s Service Tag is stored in the system board. You must
enter the Service Tag in the BIOS setup program after you replace the
system board.
NOTE: Replacing the system board removes any changes you have made to
the BIOS using the BIOS setup program. You must make the appropriate
changes again after you replace the system board.
Procedure
1
Connect the power-adapter port cable to the system board.
2
Adhere the tape that secures the power-adapter port cable to the system board.
3
Turn the system board over.
4
Align the screw holes on the system board with the screw holes on the palm-rest
assembly.
5
Replace the two screws (M2x3) that secures the system board to the palm-rest
assembly.
6
Connect the touch-pad cable and close the latch to secure the cable.
7
Connect the speaker cable to the system board.
8
Connect the I/O-board cable and close the latch to secure the cable.
9
Connect the hard-drive cable and close the latch to secure the cable.
10
Connect the power-button board cable and close the latch to secure the cable.
11
Connect the display cable and close the latch to secure the cable.
12
Adhere the tape that secures the display cable to the system board.
13
Close the display hinges.
78