Dell Inspiron 15 7557 Service Manual - Page 90

Replacing the camera, Procedure, Post-requisites

Page 90 highlights

Replacing the camera WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Procedure 1 Connect the camera cable to the camera. 2 Adhere the tape that secures the camera cable to the camera. 3 Turn the camera over and align the camera to the alignment posts on the display back-cover and snap the camera in place. Post-requisites 1 Replace the display panel. 2 Replace the display bezel. 3 Replace the display assembly. 4 Replace the fans. 5 Follow the procedure from step 2 to step 6 in "Replacing the palm rest". 6 Replace the keyboard. 7 Follow the procedure from step 4 to step 6 in "Replacing the hard drive". 8 Replace the base cover. 9 Replace the battery. 90

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93

Replacing the camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
. After working inside your
computer, follow the instructions in
After working inside your
computer
. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Connect the camera cable to the camera.
2
Adhere the tape that secures the camera cable to the camera.
3
Turn the camera over and align the camera to the alignment posts on the
display back-cover and snap the camera in place.
Post-requisites
1
Replace the
display panel
.
2
Replace the
display bezel
.
3
Replace the
display assembly
.
4
Replace the
fans
.
5
Follow the procedure from step 2 to step 6 in “
Replacing the palm rest
”.
6
Replace the
keyboard
.
7
Follow the procedure from step 4 to step 6 in “
Replacing the hard drive
”.
8
Replace the
base cover
.
9
Replace the
battery
.
90