Dell Inspiron 23 5348 5348 AIO Owners Manual - Page 68
Replacing the Optical Drive, Procedure, Post-requisites
View all Dell Inspiron 23 5348 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Replacing the Optical Drive WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. Procedure 1 Route the power cable and data cable through the routing guides on the display-panel base. 2 Align the screw holes on the interposer with the screw holes on the display-panel base. 3 Replace the screws that secure the interposer to the display-panel base. 4 Connect the power and data cables to the system board. 5 Align the screw holes on the optical-drive bracket with the screw holes on the optical drive. 6 Replace the screws that secure the optical-drive bracket to the optical drive. 7 Align the tabs on the optical-drive bezel with the slots on the optical- drive assembly and snap it into place. 8 Slide the optical-drive assembly into the optical-drive bay until it snaps into position. Post-requisites 1 Replace the I/O bracket. 2 Replace the power-supply diagnostic board. 3 Replace the VESA-mount bracket. 4 Replace the system-board shield. 5 Replace the back cover. 6 Replace the stand assembly. 68