Dell Inspiron 23 5348 5348 AIO Owners Manual - Page 91
Replacing the System Board, Procedure, Post-requisites
View all Dell Inspiron 23 5348 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Replacing the System Board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. NOTE: Your computer's Service Tag is stored in the system board. You must enter the Service Tag in the system setup after you replace the system board. Procedure 1 Replace the side I/O bracket on the system board. 2 Align the screw holes on the system board with the screw holes on the display-panel base. 3 Replace the screws that secure the system board to the chassis. 4 Route and connect all the cables to the connectors on the system board. Post-requisites 1 Replace the coin-cell battery. 2 Replace the wireless card. 3 Replace the hard drive. 4 Replace the processor. 5 Replace the processor fan. 6 Replace the processor heat-sink. 7 Replace the I/O bracket. 8 Replace the power-supply diagnostic board. 9 Replace the VESA-mount bracket. 10 Replace the system-board shield. 11 Replace the memory module(s). 12 Replace the back cover. 13 Replace the stand assembly. 91