Dell Inspiron 23 5348 5348 AIO Owners Manual - Page 85
Replacing the Processor, Procedure
View all Dell Inspiron 23 5348 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Replacing the Processor WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance. CAUTION: If either the processor or the heat sink is replaced, use the thermal grease provided in the kit to make sure that thermal conductivity is achieved. Procedure NOTE: The original thermal grease can be reused, if the original processor and heat sink are reinstalled together. If either the processor or the heat sink is replaced, use the thermal pad provided in the kit to ensure that thermal conductivity is achieved. CAUTION: You must position the processor correctly in the processor socket to avoid permanent damage to the processor. 1 If the release lever on the socket is not fully extended, move it to that position. 2 Orient the alignment notches on the processor with the alignment tabs on the processor socket. 3 Align the pin-1 corner on the processor with the pin-1 corner on the processor socket, and then place the processor in the processor socket. CAUTION: Ensure that the processor-cover notch is positioned underneath the alignment post. 4 When the processor is fully seated in the socket, close the processor cover. 85