Dell Latitude 3540 Owners Manual - Page 29
Removing the Display Assembly
View all Dell Latitude 3540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
3. Connect the antennae cables to the WLAN card. 4. Flip the computer and tighten the screws to secure the display assembly to the computer. 5. Install: a) palmrest b) keyboard c) optical drive d) hard drive e) memory module f) access panel g) battery 6. Follow the procedures in After Working Inside Your Computer. Removing the Display Assembly 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a) battery b) access panel c) memory module d) hard drive e) optical drive f) keyboard g) palmrest 3. Peel the tape that secures the display and camera cables to the system board. Disconnect the cables from their connector on the system board. Disconnect the antennae cables from the WLAN card. 4. Remove the screws that secure the display assembly to the computer and lift the display assembly off the computer. 29