Dell Latitude C840 Service Manual - Page 32
fragile components., connector, not in the middle. Pressing the middle of the connector can damage
UPC - 609525176179
View all Dell Latitude C840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Display: Dell Latitude C840 Service Manual 1 M2.5 x 6-mm screw 2 strain relief 3 display flex cable 4 pull loop 2. Remove the M2.5 x 6-mm flex-cable strain relief screw, and then use the pull loop to remove the display flex cable from the graphics card. NOTICE: When reconnecting the flex cable, press down on both ends of the connector, not in the middle. Pressing the middle of the connector can damage fragile components. 3. Open the display and, from the back of the computer, remove the two M2.5 x 6mm screws labeled "circle D" that secure the display assembly to the bottom case. 4. With the display in an upright position, lift the display assembly from the bottom case. file:///F|/Service%20Manuals/Dell/Latitude/c840/display.htm (5 of 10) [2/28/2004 8:03:40 AM]